Hardened DLC Coating AI Reflex Coating AFM Probe
Hardened DLC Coating AI Reflex Coating AFM Probe
Hardened DLC Coating AI Reflex Coating AFM Probe
Hardened DLC Coating AI Reflex Coating AFM Probe

TESPD Hardened DLC Coating

10-Pack, Al Reflex Coating

$750.00 (USD)

Model: TESPD
Resonant Frequency (kHz): 320
Spring Constant (N/m): 40
Tip Radius (nm): 15
Tip Coating:Hardened DLC
QtyPrice/Pack
1$750.00 (USD)
2-6$637.50 (USD)
7-15$562.50 (USD)
16-24$487.50 (USD)
25-37$412.50 (USD)
38+$337.50 (USD)

Qty:
Value Line etched Silicon probes with Diamond-Like Carbon (DLC) coating on tip for increased tip lifetime, for imaging in TappingMode and non-contact mode in air.
 
 Product Sheet

Specifications:
- Diamond-Like Carbon (DLC) tip coating.
- 40 N/m, 320 kHz, 10 nm tip radius, Al reflex coating.
- 10 probes per pack.
- Compatible with most commercially available AFMs.

Tip Specification

The diamond like carbon (DLC) coating is used to harden the tip to increase its lifetime. The tradeoff for the increased lifetime is that the coating also increases the radius of the tip.
Geometry: Standard (Steep)
Tip Height (h): 10 - 15µm
Front Angle (FA): 25 ± 2.5º
Back Angle (BA): 15 ± 2.5 º
Side Angle (SA): 22.5 ± 2.5 º
Tip Radius (Nom): 15 nm
Tip SetBack (TSB)(Nom): 12.5 µm
Tip Set Back (TSB)(RNG): 9 - 16 µm
Tip Coating: Hardened DLC

Cantilever Specification

The Aluminum reflective coating on the backside of the cantilever increases the laser signal (A+B) by up to 2.5 times. Although not necessary for general imaging, reflective coating is recommended for thin cantilevers (< 2.5 µm), highly reflective samples, and machine vision applications.
Material: 0.01 - 0.025 Ωcm Antimony (n) doped Si
Geometry: Rectangular
Cantilevers Number: 1
Cantilever Thickness (Nom): 3.5 µm
Cantilever Thickness (RNG): 2.8 - 4.2 µm
Front Side Coating: Diamond-Like Carbon
Back Side Coating: Reflective Aluminum